To easily remove the screws from the exhaust flange?

Temperature changes can accelerate from hot to cold, the exhaust system together with the changing conditions of humidity, the rust of the flange. If the rust continues, it could be about the thread and this could go unusable. It 'important to remove and replace the flange bolts. You should apply heat to the rust from the threads removed. If the wires are useless, you have to cut the bolts in the flange.

1. Check if the region does not have fuel to the flangeAnd fuel lines. Delete all the fuel under strict security.

Exhaust System

2. Protect hands and eyes with protective goggles and gloves.

3. Have a fire extinguisher in your area and in any case, that could cause a fire.

4. Ignite torch carefully. Make sure the flame is bright blue, or half an inch.

5. The tip of the torch has reached 6-8 cm removed from the bolt flange until it has a dull orange. Turn off the burner. Heat the screwslow, because you do not use air.

6. Allow to cool and then the flange socket that fits the bolt on the ratchet.

7. You slide the nut socket which is on the bolt flange. If the screw loose, continue to do the same procedure for the rest of the screws. If it does not take the next step.

8. Put your flame again, but now, insert the tip to 3-4 cm.

9. Heat the screw again, and when you see that there is a brightorange glow, because they use air to suck in more oxygen. The screw should then begin to melt.

10. Turn on the torch and then quickly tap the wires of the flange bolts. Repeat the process until the drain bolt.

11. Let the prisoners hot cool for 30 minutes before leaving the area, so that no flammable materials are lying on the ground.

12. Take the bolt cut after an hour or two to make sure that the screws are really cool and did not firethe bin.

To easily remove the screws from the exhaust flange?

cuisinart electric pressure cookers springbar tents 4392857 water filter